Motorcycle Repair: 99 FXDWG - No Spark, camshaft sensor, crank sensor

Question
88" TC w/203 cams, prety much stock motor. Symptom: Engine quit running while riding, cranks - no spark at plugs. Bike sat for 30 min. the restarted ran for 15 min. quit again. Sat for 1hr. restart ran 5 min. quit again. Bike will not start now. Checked Voltage to coil- OK, checked run/stop and start switch - OK.
I have tried a Screaming Eagle coil and module for test purposes ( are these plug and use items ? )still no spark at plugs ( tested using new grounded spark plug) Is there a way to test the Camshaft Sensor and Crank Sensor. How about MAP Sensor, Fuses/Breaker getting hot ect. Hope you may have some ideas, bikes apart and still looking for the Gremlin. Thanks - Loner  

Answer
I would run a new wire from the igniting switch to the coil and then check for spark,  and also check or replace the ignition wire from the modual to the coil. I think you could have a bad wire if the knowed good ignition did not give you spark at the plugs.