Motorcycle Repair: How long until its oilproof?, silicone seal, silicone sealant

Question
Bill,
Having replaced the clutch plates on my Suzuki GN125 I will be refitting the right-hand crankcase cover next. If the gasket is soaked in oil and the crankcase cover has a thin film of silicone sealant how long does it need to set before I can fill it with oil?
Thanks,
JonnyD


Answer
Jonny, you are headed down the wrong road there.
Silicone sealer is not necessary and unless it is the oil proof type will melt inside and plug up the passages.

An oiled gasket and silicone seal is not a good match....

These bikes are assembled with dry surfaces and a fresh untreated gasket.

Bill Silver