Motorcycle Repair: brake pads, disc brake pads, o rings

Question
Hi, 1995 1200 Sportster, need to replace front disc brake pads. Do I have to remove and dismantle the entire caliper assembly to put pads on, or is there an easier way? Like to know what I'm in for before I start. Are there any parts other than the actual pads I will need to replace? Like "o" rings, seals, or anything else?
Thanks...  

Answer
Its a simple procedure. Remove the two bolts the hold the caliber to the fork. The caliber will slide off the disk. Depending on what type of fender you have, you might have to remove the front wheel to miss the fender.
The pads will slide out of the caliber. There is nothing else to replace in the caliber.
Good luck and happy riding
Mike