Motorcycle Repair: Torque values and thread sealant, hex head bolts, torque values

Question
I have a 2001 Sportster Evolution 1200)that I am putting forward controls on and need to know what the torque value is for the forward engine mount bolts that go through the case, the left foot peg mounting bracket hex head bolts that go into the case and finally the exhaust pipe to engine torque values? Also, what type of thread sealant is required, if any, for each one?



Thanks for your help,
John  

Answer
USE RED LOCTITE ON ALL BOLTS BIGGER THEN 1/4-20    THE TORQUE IS 27 FT LBS ON THE ENGINE CASE BOLTS AND THERE IS NO TORQUE SPEC'S ON EXHAUST PIPE TO HEAD NUTS,  AND FOOT PEG BRACKET TO CASE IS 15 FT LBS.   SOUTHSIDE JOHNNY
WWW.SOUTHSIDESDYNO.COM  602-340-1266   PHOENIX AZ