QuestionHi Calvin,
This is John with a follow up question.
Looking at parts for ignition module, I see a Crank shaft sensor that is circular black plastic with a little upright "wall" that installs inside the distributor that has three brass framed holes for installation. This sells for between $70 to $140, and the ads say it controls injector flow among other functions, and can be installed in 10 minutes without affecting timing etc.
I also see a part called Ignition Control Module that is a flat black plastic part with female electric fittings at both ends, and two brass lined installation holes. This sells for between $200 to $300.
A brand new distributor from Nissan is only $400 and comes with a CAS, so I am guessing the CAS is the part we are talking about.
Or do both of those parts fit inside the distributor?
I don't want to buy more parts than I need to.
Thanks again,
John
AnswerHi John -
Try this link to a site that I have no problem with. Prices are great, and the quality is good. Been using them and have no complaints. A distributor can be bought for $100 - $200 dollars. If the link does not work, then the website is www.rockauto.com
http://www.rockauto.com/catalog/moreinfo.php?pk=1124146&cc=1209563&jnid=443&jpid
Calvin
