Nissan Repair: p0340 camshaft position code, camshaft position sensor, crank angle sensor

Question
i have replaced my camshaft sensor code, my battery and spark
plugs and still wont start. (nissan sentra 2006)

Answer
David,

If the code P0340 is still present there is something wring with the connection or such.  I would disconnect the battery, wait five minutes and then hook it back up.  That will clear the code.  Then, with a fully charged battery, attempt a restart.  Try a couple of times to see if the error code resets.  If not and it will not start check the fuel pressure to make sure you have fuel.  Next, check the harness for the ignition.  The camshaft position sensor is the one on top and the crank angle sensor is the one down by the harmonic balancer.