Nissan Repair: clutch peddle, clutch master cylinder, transmission job

Question
hello i replaced the crank in my 240sx and the clutch and the slave cylinder  also . the car starts but i have no clutch peddle its on the floor n the clutch will not engage
what do you recamend?

Answer
lucky for you this is an easy fix.  you need to first, grab a buddy, buy some brake fluid, jack your car and secure it on jackstands, add brake fluid to your clutch master cylinder, have your buddy pump the clutch pedal and you bleed it at the slave cylinder.  just like a brake job.  the job will take you however you long you would like.  if your looking to avoid the wife for a while, grab a cooler and say its a transmission job.   good luck.