Nissan Repair: 2005 nissan altima, nissan altima, screw head

Question
I changed the low beam bulb on the altima but it shines too
high. Is there an adjustment screw or bolt?

Answer
Augie,

Yes, the adjustment is on the back and it is a little screw head that you insert a flat blade screwdriver into and move it one notch at a time.  It looks like a wheel from looking down with little slots and the plastic is what you leverage against.  But, before you do all of this make sure the bulb is seated properly.  If it is off the light will shine different than the original.