Nissan Repair: 1997 nissan sentra gxe, cv driveshaft, nissan sentra

Question
I can't remove the rotor nut,I've tried everything I could think of from heat to hammer is the thread reversed? Is there anything else that has to be removed should I get lucky?

Thank you for your time...Ray


Answer
Ray,

I have had the same lick with these as you have.  No, it is not a reverse thread.  You will need to get a large prybar or a cheater pipe to get the leverage to get the nut off.  I have even had one that I have had to cut off with a torch.  Remember that the nut goes on the CV driveshaft.  So, worst case is you will need to replace the driveshaft if you damage it.