Nissan Repair: 2005 Pathfinder headlights, adjustment screws, flat blade

Question
I was looking for the headlamp assembly adjustment screws to re-aim the headlights a little bit after having larger wheels/tires put on.Mainly the vertical\up&down.Any help would be appreciated.

Answer
Dan,

No adjustment screw.  There are little wheels that rotate and they have a little clip that keeps the adjustment.  You use a screwdrived to move the adjustment one click at a time by moving the wheel.  It has slots in it to allow for you to get a flat blade screwdriver in and then move it one click at a time until the lights are where you want them.  There is one for left and right and another for up and down.  These are located low on the assembly.  Look down on each side and you should see them.