Nissan Repair: NOT STARTING, nissan maxima, uyi

Question
My nissan maxima 95 wouldnt start it has to be pushed, then it starts
changed:
crank position sensor
knok sensor
crankshift sensor
new battery

Answer
UYI,

If it cranks but will not start and will start when you push it then I would say the start circuit that feeds the coil is blown.  When you start the car there is 12 volts going to the coil.  When it is in the run mode there is 9 volts.  I would check the power to the coil when you turnt he key to start.  No voltage in start means the wire has failed.  Replace the cooked wire or wire around it.