Oldsmobile/Buick Repair: Interior door panel removal, interior door panel, power window switch

Question
I have a '99 Olds Alero, the right side rear window is off of the track. How do I remove the door panel to gain access &/or are there instructions for realigning the window?
Thank You, Doug

Answer
Hi here is EXACT GM Procedure.

Remove the power window switch, if equipped. **[ Remove the lower closeout cover (3).
Remove screws from the lower closeout (2).
Remove the closeout from the pull cup by prying the spring clip from the pull cup.
Push the forward spring clip rearward and pull upward on the switch bezel assembly.]**
Remove the regulator handle, if equipped. **[Remove the spring clip by inserting the a window clip removal tool between the window regulator handle and the door window regulator handle bearing plate.
Push the door window regulator handle  inward in order to remove the handle.
Remove the door window regulator handle bearing plate]**
Remove the door handle bezel. **[ Remove the retaining screw (1).
Pull the front of the cup out of the door trim panel (2).
Slide the cup forward over the pull handle while in the open position]**
Remove the trim panel by disengaging the retaining clips.

I Hope this helps.
Good Luck
Pawl