Oldsmobile/Buick Repair: Starting, spark plug wires, liter v6 engine

Question
Hi,
Thank you for responding, this what I know of the car, it was running great until I tighten the battery cables and pushed all of the connection on tight.

1983 Buick Limited 2 Door. I turn the key and get nothing I drove it home from having a new fuel pump put at the shop, it has a new battery and the spark plug wires and plugs look good. Hope you can help.

Jerry
-------------------------
Followup To
Question -
I have 3.2 liter v6 engine. All my light come on but I am not getting any spark to start. It was working before I went made sure all connections were tight. Now nothing. Help would be appreciated.

Jerry
Answer -
hi jerry would be glad to help,but will need some additional info..#1 what kind of car#2 is the engine turning over as in spinning when you try and start it? you have fuel but no spark or no fuel no spark .please answer these and i can help ty billymac

Answer
hi jerry.well sounds like either when you pushed the wires too far in the terminals.as in up to the rubber coating,which will not make a connection/.or maybe you did not get all the wires in the terminal,and one is not connected.or possibly created a spark,and blew a fuse check all fuses carefully.either way take the connectors loose and redo them makeing sure the copper part of rhe wire is all that is inside the terminal.please take a min to rate my service so we can keep it free.ty billymac