Pontiac Repair: RIM, air shocks, scan tool

Question
I am looking for the location of R.I.M. rear integrated module
Got a Code "660"
This was after I replaced the Rear Air Shocks.
There was a Hole in the Rubber..  
I hope that this is all i have to replace?.
Thanks
rj

Answer
The Rim is located on the panel behind the rear seat you have to pull the plasric panel off at the front edge of the trunk to gain access to it. You will need a GM scan tool to set up a new module they are not mated to the car untill you set up the module to match the options in the car.