Pontiac Repair: 2001 Boneville Door, bonneville window regulator

Question
I have a window that will not roll up or down. I am sure it is probably a regulator however I have no clue how to take the door panel apart. Can you direct me to some place for a diagram or give me a hint as to how to take it apart?

Answer
Hi Charles:

You can try a google search and see if that helps... But it's really not that hard to do. you need a door trim removal tool so you don't break the door or the retainers off. all around the perimeter of the door ther are plastic retainers that hold the trim to the door use the removal tool to pry the door trim away from the door and then you have to pull up on the door trim there are 2 metal clips that hold the trim to the door right behind the pull handle in the middle of the door. you have to get a bit rough with it there to get the clips to slide up and out of their retainers. Then unplug the electrical connector for the switches and you there. You have to take those clips off the door trim and put them back into the door before you put the trim back on.