Pontiac Repair: turn signal bulb repacement, phillips head screws, side marker lamp

Question
Hello, How do I get the front driver's side headlight
assemble out so I can replace the turn signal bulb?
95 Grand Am, right signal works & I replaced the back bulbs.


Answer
H Steve:

it's been a while since I took one of those a part..... Let me think.  I belive that head lamp is held in from the top with a couple of 10MM head bolts and the whole assembly will come outtowards the front. I belive the side marker lamp on the side of the head lamp is held in with a couple of torx head crews or phillips head screws. The one in the bumper if that's what you looking for is held in with 2 screws either phillips or torx.. what is going on with the lamps? Flashing fast? if so that is usually a bulb issue. turn on the 4 way flashers and walk around the car and you will see what bulbs are on or not and you can compare both sides of the car at one time. good luck:)