Pontiac Repair: 2002 Grand Am Radio, antenna cable, exact procedure

Question
One of the lights on my wifes Grand Am radio display is burned out. How do I pull the radio and replace the light?

Answer
Hi
The individual light is NOT replaceable it is an LED mounted on a circuit board. If you have the ability to do this here is the EXACT procedure from GM....

Remove the instrument panel (IP) accessory trim plate.  
Remove the radio screws.
Pull the radio toward you for access to the connectors.
Disconnect the IP wiring harness connector and the antenna cable connector from the radio.
Remove the radio from the IP.

Hope this helps
Pawl