Pontiac Repair: bleed 93 Pontiac Trans Sport ABS brakes, pontiac trans sport, wheel speed

Question
I replaced the LR wheel speed sensor, LR wheel cylinder, and a part of the brake line. I bled the back brakes and master cylinder and they seemed to be fine until I turned on the car.  The brakes stopped the car but the pedal sunk to the floor . Is there any special techiques to bleeding ABS brakes? Do I need to bleed at all four wheels? Thanks so much for any info!

Answer
Hi
No special procedure, except start from rigth rear, left rear, right front, left front.
Sounds like you got more air into system.
Bleed them again...I know you'll get it.
Keep an eye on the fluid level in master cyl. while bleeding.
Hope this helps.
Good Luck
Pawl