Pontiac Repair: shudder and clunking when turning left or right, bearing plate, ball joints

Question
Any help at this time is much appericated. I own a 95 Sunfire 2.2ltr 5spd. My problem is a shudder, clunking and viberation when turning (fine when going striaght). I have changed the axle, contorl arm bushings, ball joints, inner and outer tie rod ends, hub assembly and rims and tires. All this work and nothing has fixed this "viberation". Any suggestions?


thanx

Answer
Thats a lot of work done to still have a problem! I think my best two guesses would be either bad motor/tranny mount or a bad bearing plate or upper spring mount that is shifting and allowing the movement. I have personally had a bad upper spring mount that would allow the top of the strut to loosen up and shake during a turn that unloaded the spring tension. Hope this is some sort of help for you and good luck :)