Pontiac Repair: 1993 Grand Am power window problem, grand am power, outer skin

Question
My 93 Grand Am's drivers side power window won't go up properly. It will go down ok but going up, the fnt part of the window (closest to mirror) stays while the back half rises. I tried to remove door skin to see inside but it still seems attached around handle area. I removed outer skin screws, screw in arm-rest and mirror adj torx. Anything else I didn't see?

Answer
Hi,Dave

It may be that the ft portion of the window is binding on the channel moulding/weatherseal,try lowering the window all the way down,then spray silcon type lubricant into and on the weatherseal were the window guide is,this may free up the window,usually the weatherseal gets dry in that area and swells causing the window to bind.

ED