Pontiac Repair: 2000 Sunfire RKE Programming, wire connector, keyless entry

Question
I'm looking for instructions on how to program a keyless entry remote for a 2000 Sunfire. Can you help?

Thanks.

Answer
They change the procedure on every model every year but if I remember correctly, there should be a connector in the trunk, on the left side, I think. If it is a single wire , ground it, and if it is a 2 wire connector, jump across the 2 wires. When the locks cycle, press and hold the lock button on the remote until the locks cycle again, then do the same with the 2nd remote.