RV Repair: atwood furnace/norcold refridgerator, limit switch, refridgerator

Question
i have an atwood 8535 iv dclp and i have recently replaced the motor and can not get it to fire up i think i put some wires in the wrong spot there are two white wires comeing from the board and under the motor cover where do they hook up at.  the fridge runs but it does not seem to get very cold while the freezer works perftect, it doesnt matter wether it is dc or lp.

Answer
Greg, First the 2 wires go to the sail switch. You should be able to tell if the wires are on right if you check the one wire that is by itself on the board connection to see if there is power getting there. If it is and nothing is coming out then the board needs replaced, and if not then you have a wiring problem or the sail or limit switch is bad. Thanks, Bill