Saturn Repair: 2000 Pontiac Grand Am bulb changing, negative battery cable, release tabs

Question
How do I change the front turn signal bukbs on a 2000 Pontiac Grand Am?

Answer
1. Disconnect the negative battery cable.
2. Disengage the release tabs upward in order to release the ball from the socket (2).
3. Remove the headlamp assembly (3) from the body mounting.
4. Remove the sockets/bulbs from the headlamp assembly.
5. Twist the socket and pull outward.

INSTALL
1. Install the sockets/bulbs into the headlamp assembly. Push the socket inward and twist until the socket is retained.
2. Install the headlamp assembly (3) into the mounting position (ball and socket fitting).
3. Engage the sliding tabs (2) in order to secure the headlamp assembly (3) into position.
4. Connect the negative battery cable.
5. Inspect the headlamp assembly for proper operation.