QuestionMy Cub Cadet 1050 42" cut wont start.Turn the key with plenty of battery juice,engine starts turning but stops short of turning over completly.I attached another high amp battery to assist,the engine turns over reluctantly and backfires.Valves,Compression Relief Valve ??
AnswerHello Danny:
>>Sorry for the Delay. Snow and Ice have Hit Us hard and I have been Very Busy.
>>This is a Common Problem on OHV Engines when the Valve Clearances are Not Correct and Require Setting.
>>You can View a Breakdown/IPL at this Site Addy,
http://www.emerichsales.com/ and Select Cub Cadet in the Drop Down Under "Parts Lookup" at the Left of the Page. Now Fill Out the OEM Part Diagrams Look Up by Model Fit.
>>The 1050 is the Series Model. I Used the 2007 and Earlier Models for Reference.
>>Send me the Make, Model and Type or Spec Numbers Off the Engine, Please. With these I can Locate the Proper Manual and Better Assist you.
>>If you Hit a Snag or this Does Not Correct the Problem, I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Received Anytime. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
