Small Engines (Lawn Mowers, etc.): mcculloch chain saw mac 3216, fuel line, steel wire
Questionhow to replace fuel lines /getting to fuel tank?
AnswerI have a tool I made from a small piece of steel wire from from a hobby shop. The steel wire is about .032 diameter, very thin. I folded the wire in half to make what looks like a V, a very tight V. I run the V part of the wire from the outside of the fuel tank and come out the fuel fill hole. Then, I cut a taper in the fuel line, insert the taper in the V of the wire and pull the wire and fuel line back through the tank.
Does this make any sense? What model of saw do you have.
Eric