QuestionQUESTION: Hi john i have a zero turn hustler mower fitted with a gxv530 honda it has no spark at all on both plugs or coils have tried every think the stopper diodes that goes to the coils i found is open circuit i removed it still no spark ,is it possable both coils are shot ,i have isolated the motor totally from all safety switches many t5hanks Harold.
ANSWER: Hello Harold:
>>It is Rare for Both Coil to Go Bad at the Same Time.
>>Did you Disconnect the Shut Off Lead/s at the Coils?
>>Is the Magnet Still in Place on the Outside of the Flywheel.
>>Will the Flywheel Magnet Hold a 1/2" X 9/16" Combonation Wrench?
>>Thanks
Respectfully
John
PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: thanks for quick answer yes the magnet is still there ,it will hold combo wrench plus,and i have removed both shut off leads ,i did say in my first question that i found the dioes assembly to be open circuit zero reading on the ohmes meter could this have back fired and shot the coils many thanks Harold. ps Happy new year.
AnswerHello Again Harold:
>>Some of these Shut Off Diodes will Read Open Until the Grounded Side (lead of the Diode goes to the Shut Off Switch) of the Diode is Grounded and a Circuit is Completed.
>>Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you.
>>Thanks
Respectfully
John
PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
