Small Engines (Lawn Mowers, etc.): Tecumseh HM80, question pool, overhead valve

Question
What is the recommended torque for the headbolts of a tecumseh HM-80-115112A motor?  

Answer
Hello Ross:

>>Sorry for the Delay. This Question was Located in the Question Pool and I can Only Answer Questions from the Question Pool when I am Not Answering Questions here or at the Other Site I Answer Questions at.
>>The L Head (Flat Head) HM80 has a Head Torque of 22 Ft Pounds.
>>The OHV (Overhead Valve) HM80 has a Head Torque of 26 Ft Pounds.
>>If you Hit a Snag or this Does Not Correct the Problem,  I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Received Anytime. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John