Small Engines (Lawn Mowers, etc.): craftman leaf blower, craftsman leaf blower, pat answer


Question
QUESTION: Hello John.
My craftsman leaf blower has the exact problem described by Tham.  The one thing I found is that if I turn it upside down it runs fine.  Right side up it won't start unless I spray some engine start into the carb and then stalls in seconds.  Any idea what I need to fix the problem.

Thanks,
Pat

ANSWER: Hello Pat:

>>Check/Replace the Fuel Line in the Tank.
>>Usually when this Occurs the cause is a Bad Fuel Line or the Fuel Filter is No Longer Attached to the Fuel Line in the Tank.
>>Send me the Make and Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. I Hope you Had a Happy Holiday and May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Received Anytime. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John

---------- FOLLOW-UP ----------

QUESTION: Hello again John,
The model number is 316.794990 for my craftsman leaf blower.  I didn't get to check your suggestion yet but I'll check it Saturday.  Thanks again for volunteering as you do.

Pat

Answer
Hello Again Pat:

>>This Unit is Made for Sear by Ryobi.
>>To View a Breakdown of this Unit Go to this Site Addy, http://www.searspartsdirect.com/partsdirect/index.action?sid=PSHx20080114x00001 and Enter the Model Numbers  and Select Model Search. Now Select Go. From this Page you can View Diagrams and Parts Lists.
>>If the Fuel Line and Filter are in Good Condition and are Not the cause for this Problem, then
>>Let me Know, Please.
>>Thanks.

Respectfully

John

PS: I am Allowed to Answer 3 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Follow Up Questions are Received Anytime. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John