Small Engines (Lawn Mowers, etc.): Gas in air filter, valve clearances, excessive gas

Question
I have tried everything john to no avail.New carb....It is not float,seat,valve.Breather clean.Now what John...what could it be.
I dont seem to have it going into my crankcase.I don't smell it.
But you can sure see it spraying out of filter.Any suggestions appreciated John.Your quick responses are great!!!!!
                  James

Answer
Hi James:

>>The ONLY Other Possible cause for Excessive Gas Spray from the Carburetor Intake is the Intake Valve Requires Seating or you need to Open the Clearance/Gap between the Valve Stem and the Tappet Slightly.
>>Sometimes the Suggested Valve Clearances may be Slightly Off for the Engine in Question and you have to Open/Close the Clearance/Gap Slightly for the Engine to Run Correctly.
>>It is Not Often that this Happens, but it Does Happen from Time to Time on All Engines, Not just Small Engines.
>>Thanks for the Comments and Ratings. Remember to Vote for Me in the Presidential Elections. LOL.
>>I am Sure you know; As Always, If you Hit a Snag or this Does Not Correct the Problem,  I Hope to be Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John