Small Engines (Lawn Mowers, etc.): B&S 5hp engine, throttle shaft, appropriate boxes

Question
I know you have probably been asked this question numerous times so I apologize in advance. I have a Briggs 5HP engine on a Craftsman tiller. I bought it off a neighbor who had attempted to rebuild the carburetor. I soaked the carb in cleaner and put a rebuild kit in it. My problem now is how to hook up all the linkeage. I haven't a clue, don't have access to any manuals, and any exploded drawings that I can find don't show enough detail for me to do it correctly. The engine model # is 130202-3129-01. Any assistance would be greatly appreciated.

Thanks

Mike

Answer
Hello Mike:

**The Throttle Cable Attaches to the Throttle Control Bracket. The Cable Moves a Slide that Moves a Pivot. The Pivot has the Spring  Attached to it and the Other End of this Spring Attaches to the Governor Arm. The Solid Link Connects to the Governor Arm and goes to the Throttle Shaft on the Carburetor.  When the Throttle Cable is Moved it Moves the Pivot and the Pivot Pulls the Spring. The Spring Pulls the Governor Arm and the Governor Arm Moves the Throttle Shaft. Usually the Spring is in the Lower Hole in the Governor Arm and the Solid Link is in the Top Hole of the Governor Arm.**
>>You can View a Breakdown/IPL of the Engine at this Site Addy; http://www.briggsandstratton.com/maint_repair/manual_and_more/ and Enter the Model Numbers (130202) and the First 4 Type Numbers (3129) in the Appropriate Boxes and Click GO. Then Select Download PDF.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John