Small Engines (Lawn Mowers, etc.): Model 8 Briggs engine, overhead valve engines, briggs and stratton

Question
I have a Briggs model 8 engine sold by Sears. The Sears # is 500.702052, Serial # 231600. I need to identify the Briggs # so I can order parts for an overhaul. Two days online and no luck converting Sears # to a Briggs #. Can you HELP?
Many Thanks,
Larry

Answer
Hello Larry:

>>The Older Model Briggs and Stratton Engines had the Model, Type and Code Numbers Stamped into the Blower Housing (metal engine cover) Above the Spark Plug.
>>For Most Briggs Engines:
>>The Model Numbers May be Stamped Into the Blower Housing (metal engine cover) Above the Spark Plug. Many horizontal shaft, overhead valve engines have these numbers stamped into the OHV rocker cover. However, on certain overhead valve powered generators, the equipment manufacturer installs a decorative chrome rocker cover OVER the Briggs cover. If your engine has a decorative cover, it may be necessary to remove it in order to locate the Model, Type, and Code. You can Also Use this Site Addy; http://www.briggsandstratton.com/maint_repair/BS_modeltypecode.pdf for Assistance in Locating the Model, Type and Code Numbers of the Engine.
>>Are you Sure you have the Correct Craftsman Model Numbers? I did Not Locate these Numbers in my Microfiche or Online.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 5 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John