Small Engines (Lawn Mowers, etc.): Turf Tiger wont start. Is it the ignition switch?, starter solenoid, jumper cable


Question
How do I know if an ignition switch is no longer functional?  The problem is that my Scag Turf Tiger won't start.  The battery is not the problem.  When I turned the ignition switch, one clicking noise results and the amp guage remains at zero.  The fuses look okay.  Thanks.

Answer
Hello Dave:

>>From your Description it Sounds like the Starter of the Starter Solenoid is Bad and Requires Replacing. The Clicking Noise Tells me the Key Switch is Good.
The Following is an Instruction File I Made for Checking/Testing the Starter and Solenoid.
>>**(with the Spark Plug/s Removed) To Check the Solenoid and Starter, Once you are Sure the Battery is Fully Charged/New.
>>Use your Jumper Cable Set and Attach the Positive Lead Onto the Positive Post of the Battery (make sure the Battery is Fully Charged or is a New Battery).
>>Now Firmly Touch the Large Post on the Starter.
>>If the Starter Does Not Turn and you can turn the Engine by Hand, then the Starter is Bad.
>>If the Starter Turns the Engine Properly, Then Check the Solenoid. >>Firmly Touch the Small Post at the Base of the Solenoid that has the Ign Wire Attached to it. If The Starter Does Not Turn and the Solenoid Clicks, Then the Solenoid is Bad.**
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John