Small Engines (Lawn Mowers, etc.): craftsmn mini tiller, mini tiller, model numbers

Question
Hello,
I have  craftsman 2.0 hp mini tiller (cultivator).  The tines have ceased to spin when it is under any load.  I'm thinking it's  a clutch problem.  Is there any adjustment, or doI have to pull it apart and install a new clutch?  I don't have an owner's manual so I haven't been able to figure it out.  model is 536.292510.
thanks

Answer
Hello Scott:

>>To View a Breakdown of this Unit Go to this Site Addy, http://www.searspartsdirect.com/partsdirect/index.action?sid=PSHx20080114x00001 and Enter the Model Numbers 536.292510 and Click Search. From this Page you can View Diagrams and Parts Lists for you Equipment Using the "View Sub Components" Section Near the Bottom Left.
>>There is No Adjustment and the "Rotor" (Clutch)Part #335350MA  $27.50us) is Shown in the Engine Sub Component File at the Site Addy I Provided.
>>If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Happy. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John