QuestionThe fuel hoses on my chainsaw have deteriorated and I am not sure how to re-connect the new hoses to the carburetor and fuel tank. I think there is one large hose and 1 small hose. There may even be a third hose, not sure. Once I took the cover off the hoses were broken and out of place. Thanks for any assistance with this matter.
AnswerHello D.K.
>>The Carburetor has 2 Plates.
>>1 Plate has a Single Screw in the Center and the Other has 4 Small Screws at the Outer Corners.
>>On my 2100 which I just Looked at, the Small Hose (has the Fuel Filter in the Tank Attached to it) goes to the Side with the Single Center Screw and the Large Hose (Return Hose) goes to the Side with the Smaller 4 Outer Screws.
>>You can View a Breakdown/IPL of the Mower at this Site Addy, http://hayward.arinet.com/scripts/EmpartISAPI.dll?MF&app=ASP&lang=EN&TF=Mainfram... and Select the Catalog Poulan/Weed Eater.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.
Respectfully
John
