Small Engines (Lawn Mowers, etc.): Engine Rebuild, bolt torque chart, bolt torque specs

Question
I am currently rebuilding a Kohler CV14S out of a Simplicity Broadmoor Hydro 14. I have effectively dismantled the engine and received all my parts. Before I start to put it all together I realized I don't have all the torque specs for the engine. All I have is the Head bolt torque specs that came with the new gaskets. I hope you can give me as much information as possible. Thank You.

Answer
Hello Nozer:

>>I Assume you have De-Glazed the Cylinder and Washed the Block and are Ready to Rebuild the Engine.
>>For the Engine Bolt Torques Use this Site Addy; http://outdoorpowerinfo.com/engine_specs/ .
>>Any Torques Not Found here you Use the Standard Bolt Torque Chart at this Site Addy; http://www.morbark.com/Service/belttorque.pdf .
>>All the Bolts are Grade 5 if they Do Not have Torque Specification at the http://outdoorpowerinfo.com/engine_specs/ Site.
>>Please, Do Not Hesitate, If you Hit a Snag, if I Missed Something or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

>>PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John