Small Engines (Lawn Mowers, etc.): Stihl MS 390 chainsaw, plastic casing, stihl ms 390

Question
I have a Stihl MS390 Chainsaw that the chain oil is pouring out of a breather hole in the front, which is located between the muffler and the plastic casing.I took it apart to see what was behind it, and saw that one end of the oil pump is connected to this hole. Oil should not be coming out of this hole. Also the chain bar is not getting oil.I cleaned and inspected all parts that I took off and still has the same problem. Any suggestions would be appreciated, thank you.

Answer
Hello Mike:

Check the Bar Oiler. It Sounds like the Oil Supply Line to the Bar Oiler is Off and Requires Reconnecting. Most likely the Line you See is the Line that Connects to the Bar Oiler.
Please, Do Not Hesitate, If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John