Small Engines (Lawn Mowers, etc.): Replace Pawl on Husqvarna 55 chain saw, husqvarna logo, husqvarna 55

Question
I have to replace the starter pawls on my Husqvarna 55 chain saw.  I have removed the outer cover and the inner fan cowling and the nut that seems to hold the fan "fly wheel" unit in place.  The pawls look to be held in by a pressed in pin of some sort but I cannot get the flywheel off to see the back side.  An section view of this or some insite would be help full.

Answer
Hello Bob:

You are Correct. The Pawls are Held by a Pressed Pin. You will Require the New Pins and Pawls. You can View the Husqvarna Model List at this Site Addy, http://www.partstree.com/parts/ and Click on the Husqvarna Logo. Now Select Chainsaws. Now Scroll to your Model.  Now Select the Model of the Equipment you Wish to View. You will Locate the Pins, Springs and Pawls Listed in the Ign/Flywheel Breakdown. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Comments and Ratings are Greatly Appreciated. Thanks.

Respectfully

John