Small Engines (Lawn Mowers, etc.): 5 HP B&S Carburator/Fuel Tank, overhead valve engines, horizontal shaft

Question
Hello John,

  I bought a 20 Ton Log Splitter that I believe has been under water judging by the corrosion and water found in the fuel tank.  I would like to purchase a new (or used) replacement carb and tank.  Can you provide any leads (price, source, shipping).  Any info would be greatly appreciated.

Answer
Hello Danny:

Send me the Model and Type or Spec Numbers Off the Engine, Please. With these I can Locate the Proper Manual and Better Assist you. The Model Numbers May be Stamped Into the Blower Housing (metal engine cover) Above the Spark Plug. Many horizontal shaft, overhead valve engines have these numbers stamped into the OHV rocker cover. However, on certain overhead valve powered generators, the equipment manufacturer installs a decorative chrome rocker cover OVER the Briggs cover. If your engine has a decorative cover, it may be necessary to remove it in order to locate the Model, Type, and Code. You can Also Use this Site Addy; http://www.briggsandstratton.com/maint_repair/BS_modeltypecode.pdf for Assistance in Locating the Model, Type and Code Numbers of the Engine. Thanks.

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John