Small Engines (Lawn Mowers, etc.): No spark Tecumseh, valve cover gasket, safety switches

Question
Had oil coming out of muffler, replaced valve cover gasket and now cannot get mower to start.  Has compression but no spark jumping across the plug.  Any ideas why no spark ?
Engine model VLV60.  Thanks.

Answer
Hello Don:

**To Check the Ign Coil; Remove the Spark Plug/s. Wrap a Wire Around the Threads of the Plug and Attach the Other End of the Wire to the Engine Block. Remove the Blower Housing (metal engine cover). The Wire that is Connected to the Coil/Ign Module from the Shut Off Switch needs to be Removed (unplugged) from the Coil/Ign Module. Now Check for Spark at the Plug. If Spark, then the Shut Off Switch or the Wire is Bad. If Still No Spark, then the Coil/Ign Module is Bad. If there are Safety Switches on this Unit and the Coil is Good; you Need to Check the Safety Switches for Being Bad Also.** You can View a Breakdown/IPL of this Engine at this Site Addy, http://www.outdoordistributors.com/ and Select the T. Then Select Tecumseh. Then Select Don't have Part Numbers. Then Enter the Model Numbers. Then Select your Model and Download the File for Online Viewing. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John