Small Engines (Lawn Mowers, etc.): briggs 14hp head gasket, briggs and stratton, head gasket

Question
Hi i'm trying to change the head gasket on my briggs. Do you have a link to some procedures on this? My #,s are
28n707
1118
010515ze
it is an 2001 14hp vertical mounted engine
thanks tate

Answer
Hello Tate:

You can View a Breakdown/IPL of this Engine at this Site Addy, http://www.outdoordistributors.com/ and Select the B. Then Select Briggs and Stratton. Then Select Don't have Part Numbers. Then Select the File # 28. Then Select the Folder # 28N700. If Using this Breakdown Does Not Assist you in Replacing the Head Gasket, then Let me Know and I can Supply you with More Detailed Instructions on Replacing the Head Gasket on this Unit. The Following is the Torque Specifications for Replacing the Head Gasket: Head Bolts = 220 Inch Pounds or 20 Foot Pounds. For the Proper Torque on the Remaining Bolts (ie. Valve Cover, Rocker Arm and ect), Use the Chart at this Site Addy; http://www.morbark.com/Service/belttorque.pdf . If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John