Small Engines (Lawn Mowers, etc.): drive belt change, craftsman model, drive pulley

Question
I have a Craftsman model # 502.270210, it's a 30" rear engine rider. What is the easiest way to change the drive belt? Should I unbolt the entire drive axle leaving the pulleys'? or remove the pulleys'/assembly? Thanks

Answer
Hello Bob:

Usually, Removing the Deck Drive Belt, Unbolting the Engine Drive Pulley and Lowering it will Allow you to Replace the Drive Belt. Lock the Clutch/Brake in the Park Position and the Belt will have Enough Play to Remove it from the Transaxle Pulley. To View a Breakdown of this Unit Go to this Site Addy, http://www.searspartsdirect.com/partsdirect/index.action and Enter the Model Numbers and Click Search. From this Page you can View Diagrams and Parts Lists for you Equipment Using the "View Sub Components" Section. Select the Motion Drive File. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John