Small Engines (Lawn Mowers, etc.): honda gc160 flywheel, honda gc160, gear puller

Question
how do i get the damn flywheel off i got the nut off but i cant get it off

Answer
use a gear puller.  There should be three holes around the flywheel nut.  Get a gear puller that allows you to place bolts through it and into the flywheel.  Use as directed.  Be sure to thread the nut back on flush with the end of the crankshaft before you try to pull it.  It will protect the threads. The flywheel is a taper fit with no gasket.   It will usually pop if the right tools are used.  If you do not have the tool, rent it.