Small Engines (Lawn Mowers, etc.): Blade Contol cable, blade control, appropriate boxes

Question
John, I am putting a B&S 121602-0349 engine on an older Snapper 21407T deck.  There are two arms and two cable end stops on the muffler side of the engine. I want to make sure I am connecting the blade control cable to the correct arm. Can you point me to an illustration, or describe the correct connection point?  Thank you.

Answer
Hello Brad:

You can View a Breakdown of the Mower at this Site Addy; http://www.snapper.com/manuals/ Select your Model from the List in the Model/Part Numbers Section. Select Parts Manual from the Manual Type Section and Click Find Manuals. Now Download the Manual for your Unit from the  List Provided. You can View a Breakdown/IPL of the Engine at this Site Addy; http://www.briggsandstratton.com/maint_repair/manual_and_more/doclist.aspx?categ... and Enter the Model Numbers (XXXXXX) and the First 4 Type Numbers (XXXX) in the Appropriate Boxes and Click GO. Then Select Download PDF. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John