Small Engines (Lawn Mowers, etc.): McCulloch gas trimmer model # 3315, zama carbs, mcculloch gas trimmer

Question
Hi,John about my McCulloch trimmer Model 3315 I've looked at the carb.There is no brand name on the carb other than Wisdom on the throttle control lever. I do have experience with walbro and zama carbs and they look nothing like whats on this unit? I'm wondering if this is a China nock off carb? Reason I say this is that the unit came with a torch L7RTC spark plug. I did not buy this unit new so I have no operators manual or parts list for this unit. Do you have a parts listing for this complete model,shaft,engine housing etc, or at least a operators manual.All the searching on the net has turned up nothing on this unit. It's like McCulloch never made this trimmer?  One more thing the throttle control lever runs down through the middle of carb unlike walbro or zama which are to the side of the carb.The choke lever is attached to the air filter housing not the carb,there is no linkage from the choke lever to the carb whatsoever. There is no speed adjustments, just the idle screw next to the throttle lever.There is a primer bulb located under the air filter housing attached to the carb via fuel lines,and every thing looks factory. This unit has me stumped. Any assistance is greatly appreciated!!!

Answer
Hello Jeff:

Jenn-Feng Purchased McCulloch in 1999 when they went Bankrupt. MTD Supports McCulloch in the US for Jenn-Feng. You can View a Breakdown of this Unit at this Site Addy; http://manuals.mtdproducts.com/mtd/public/list.jsp?BrandCode=10001 and Enter the Model Numbers MT3315 and a Serial Number. The Number  1 is all that is Required for a Serial Number. Then Select the Manual you Wish to View Online. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John