Small Engines (Lawn Mowers, etc.): ignition switch for mower, briggs and stratton, mtd products

Question
i have a huskee mower made by tractor supply. i have been trying to find an ignition switch for it. the model number is A4514-010. type number 0131. serial number s50147855. could possibly be 550147855.it has a briggs and stratton motor in it. the model number is 294777. the type number is 0113-01. the serial number is 90042613. if you know  where to get  this switch please let me know. i have been to tractor supply and the website with no success. i bought one at the store they said would work and it was not right. please help!

Answer
Hello Aron:

Send me the Model Numbers Off the Mower, Please. With these I can Locate the Proper Manual and Better Assist you. Huskee is an MTD Manufactured Mower Sold by Tractor Supply. Generally the identification tag is on a part of the unit that, even after years of use, rarely needs replacement. For most of MTD power equipment, these tags are approximately 2" by 3" in size. They also have the MTD Products name, address and customer service phone number listed across the bottom. For hand held product, the tag is normally white and approximately 1" by 1/2" in size. Hand held i.d. tags are normally on an aluminum portion of the engine, somewhat set into the unit to protect the label from wear. (A bar code will also be on this tag.) Riding mower tags are located on the underside of the seat. For walk behind mowers this tag is found either on the deck or on the rear door of rear discharge units. Tiller model and serial tags are generally on the tine housing. **The model and serial tags for two-stage snow throwers are located on the bottom of the main gear housing which is often called the belly pan, while single stage snow thrower tags are next to the key and primer. For other products like log splitters, chipper shredders and edgers, tags can be found on the frame or main housing.** Thanks.

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John