Small Engines (Lawn Mowers, etc.): Tecumseh Enduro 5HP, throttle shaft, throttle cable

Question
Hello John, I recently bought a 5hp enduro from a friend for my tiller Engine runs great but no governor controls. I bought the governor link and exstension spring. To you have a good picture or diagram of the hook up of these parts? All I can get is a exploded parts view which is no help on hooking it up. Any help would be appreciated

Answer
Hello Donnie:

Pictures are an Issue that I am Addressing at this Time. I have had So Many Requests for Pictures of the Carburetor/Governor Linkage that my Daughter is Trying to get me Pictures for the Questioners. The Following is a File I made that Describes the Governor/Carburetor Linkage. **The Throttle Cable Attaches to the Throttle Control Bracket. The Cable Moves a Slide that Moves a Pivot. The Pivot has the Spring  Attached to it and the Other End of this Spring Attaches to the Governor Arm. The Solid Link Connects to the Governor Arm and goes to the Throttle Shaft on the Carburetor.  When the Throttle Cable is Moved it Moves the Pivot and the Pivot Pulls the Spring. The Spring Pulls the Governor Arm and the Governor Arm Moves the Throttle Shaft. Usually the Spring is in the Lower Hole in the Governor Arm and the Solid Link is in the Top Hole of the Governor Arm.** If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John