Small Engines (Lawn Mowers, etc.): Ignition Modlue Gap Lawn Boy, assembly drawings, mt dew

Question
What is the gap setting when replacing the ignition module on a Lawn Boy Silver Pro, Model #10323, Serial #210027745?

Answer
Hello Bob:

The Ign Module/Ign Coil is Set at .020in from the Flywheel. Use a Panel from a Soft Drink Carton (I use the Side Panel from a Mt Dew 24 Pk). Cut a Section 3" X 6" and Set it Between the Magnets on the Flywheel and the Ign Module/Ign Coil. Allow the Magnets to Pull the Ign Module/Ign Coil to the Flywheel and then Tighten the Ign Module/Ign Coil. Carefully Turn the Flywheel and Pull the Cardboard Panel from Between the Flywheel and the Ign Module/Ign Coil. You can View a Breakdown/IPL of the Mower at this Site Addy, https://lookup3.toro.com/partdex/default.cfm?xCaller=LawnBoy and Select Start Parts Viewer. Then Enter the Model Numbers (10323) and Click Search. Then Select View Assembly Drawings. Then Select the Component you Wish to View. Select the Engine File. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John