QuestionI have a weedeater brand string trimmer and it has two recessed carburetor screws that are shaped like an old wind up watch pin, you know, with little teeth all way around. Can you by any chance tell me where on Gods Green earth , i can purchase this type of tool. If i knew what it was called , I'm sure the Internet would find it , but i have had no such luck. Why couldn't they just put regular old screwdriver slots on the head of these adjustment screws?
AnswerHello David:
Try you Local Snap On Tool Supplier, the Mac Tool Supplier or Some of the NAPA Automotive Parts Retailer can Sometimes Order the Special Nut Driver for you. I Forget the Actual Name of the Nut Driver, but will Follow Up to you in the Am on 5/14/08 as Soon as I Locate the Paperwork for the Purchase of the One Used in the Shop. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
Hello Again David:
I will Speak to the Tool People on Tuesday of the coming Week and will Follow Up to you as Soon as I have a Tool Part Number and a Location to Purchase the Carburetor Tool. Thanks for Using All Experts. Till Next Time. May All Your Mechanical Problems be SMALL ONES and May the All Mighty Bless You and Yours. Thanks Again.
Best Wishes and Good Luck
Respectfully
John
