Small Engines (Lawn Mowers, etc.): wiring problem, murray ride on mowers, ride on mowers

Question
sir i have a murray 48" 18.5hp widebody the motor is not original and the model number is unreadable....if you can't help i understand. the problem is. put a solonid on but the i don't know where to put the wires .the two batt. wires are on the posts. red goes on the starter side post?i have a green and a black don"t know where they go.....

Answer
Hello Kendell:

No Worries: Most of the Murray Ride On Mowers are Wired the Same. Go to this Site Addy, http://www.smallenginepartswarehouse.com/parts.asp and Select Shop Online Parts Look Up. Then Select the Model Tab. Then Select the OEM (Murray) and Enter the Model Numbers (46569X71A). Then Double Click on your Model in the Results Area. Then Select the Section of the Unit you Wish to View. Select the Electrical File. If for Some Reason this is Not the Proper Schematic, Let me Know, Please. If you Hit a Snag or this Does Not Correct the Problem,  I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.

Good Luck

Respectfully

John

PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.

Respectfully

John