QuestionQUESTION: I have a poulan pro model pp4620. It does'nt seem to be getting enough oil to the bar. I was wondering if there is any way to adjust the amount of oil pumped to the bar or if something might be wrong with my saw.
thanks,
jeff
ANSWER: Hello Jeff:
If you are Using the Proper Weight Bar Oil, then it can be; 1- The Oiler is Not Pumping the Oil Properly or 2- the Oiler Port Needs to be Bigger. I have had to Enlarge Every Bar Oiler Port of the Saws that are Used here because of Lack of Oil to the Bar. I Usually Drill the Oil Port 1 Size Bigger Until I get the Proper Size to Properly Oil the Bar. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
---------- FOLLOW-UP ----------
QUESTION: Do you mean the oiler port on the saw or the port on the bar?
Thanks,
Jeff
AnswerHello Again Jeff:
I Apologize for Not being Clearer. I am Talking about the Saw Oiler Port. If you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Thanks.
Good Luck
Respectfully
John
PS: I am Allowed to Answer 10 Questions a Day. If you See I am Maxxed Out, then Try Submitting your Question at or Just After 8pm EST (US). My New Day Starts then. Thanks.
Respectfully
John
